Anthem P Series – Performance From The Heart
Anthem P Series state-of-the-art multichannel amplifiers deliver 325 watts of continuous power per channel into 8 ohms.
Each channel is a self-contained state-of-the-art mono amp on its own circuit board with heatsink, tuned toroidal transformer and rugged power supply. No common audio path = a complete absence of crosstalk.
Industry-Leading Feature
Independent Power Supplies
Hand-Designed Circuit Boards
RCA and XLR True-Balanced Inputs
Have Questions About Amplifier?
Contact Us For Free Consultation:WhatsApp Our Expert!
Product Line of the P Series
| P5 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| GENERAL |
|
5 Single-Ended, 5 Balanced, 1 Relay Trigger (3.5 mm Mono Jack) | ||||||||
|
5 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack) | |||||||||
|
0.0007% at 1 kHz, 0.008% at 20 kHz | |||||||||
|
0.00019% (CCIF, 325 W into 8 Ω) | |||||||||
|
10 Hz to 150 kHz (+0 -3 dB, 325 W into 8 Ω) | |||||||||
|
20 Hz to 20 kHz (+0 -0.15 dB), 5 Hz to 100 kHz (+0 -2 dB) | |||||||||
|
1 Vrms in for 28.3 Vrms out (100 W into 8 Ω) | |||||||||
|
18 kΩ (RCA), 22 kΩ (XLR) | |||||||||
|
>600 at 20 Hz, 400 at 1 kHz (ref. 8 Ω) | |||||||||
|
125 dB, A-weighted (ref. 325 W) | |||||||||
|
-140 dB (20 Hz), -80 dB (20 kHz) | |||||||||
|
29 dB | |||||||||
|
40 V/µs | |||||||||
| SWITCHES |
|
Power (On/Off) | ||||||||
|
On/Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR, XLR -6dB) | |||||||||
| POWER REQUIREMENTS |
|
105 to 130 V, 60 Hz | ||||||||
|
2 x 1800 W | |||||||||
| DIMENSIONS |
|
9-3/8 inches (23.8 cm) including feet | ||||||||
|
Faceplate 19-1/4 inches (49 cm) Chassis 17-1/4 inches (43.8 cm) | |||||||||
|
22-1/2 inches (57.2 cm) including handles | |||||||||
|
130 lb (59 kg) | |||||||||
| P2 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| GENERAL |
|
2 Single-Ended, 2 Balanced, 1 Relay Trigger (3.5 mm Mono Jack) | ||||||||
|
2 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack) | |||||||||
|
0.0007% at 1 kHz, 0.008% at 20 kHz | |||||||||
|
0.00019% (CCIF, 325 W into 8 Ω) | |||||||||
|
10 Hz to 150 kHz (+0 -3 dB, 325 W into 8 Ω) | |||||||||
|
20 Hz to 20 kHz (+0 -0.15 dB), 5 Hz to 100 kHz (+0 -2 dB) | |||||||||
|
1 Vrms in for 28.3 Vrms out (100 W into 8 Ω) | |||||||||
|
18 kΩ (RCA), 22 kΩ (XLR) | |||||||||
|
>600 at 20 Hz, 400 at 1 kHz (ref. 8 Ω) | |||||||||
|
125 dB, A-weighted (ref. 325 W) | |||||||||
|
-140 dB (20 Hz), -80 dB (20 kHz) | |||||||||
|
29 dB | |||||||||
|
40 V/µs | |||||||||
| SWITCHES |
|
Power (On/Off) | ||||||||
|
On/Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR, XLR -6dB) | |||||||||
| POWER REQUIREMENTS |
|
105 to 130 V, 60 Hz | ||||||||
|
1800 W | |||||||||
| DIMENSIONS |
|
9-3/8 inches (23.8 cm) including feet | ||||||||
|
Faceplate 19-1/4 inches (49 cm) Chassis 17-1/4 inches (43.8 cm) | |||||||||
|
22-1/2 inches (57.2 cm) including handles | |||||||||
|
75 lb (34 kg) | |||||||||
Find Out More About The Best Anthem Products!
P Series Features
Massive Toroidal Transformers
Conservatively rated, in a low-profile design, these low-impedance toroidal power supplies—one per amplifier channel—make no sacrifices when it comes to delivering a continuous supply of pure, clean low noise power.
They are shaped to minimize hum while a sequence-controlled soft turn on significantly reduces power line transients and in-rush current during start up, thereby preventing accidental tripping of the circuit breakers.
Edge-Of-The-Art Multi-Mono Design
By design, P2 and P5 amplifiers are powerful independent “monoblock” amplifiers. Each channel is self-contained on its own glass-epoxy circuit board and heatsink and benefits from an independent power supply. Since there is no common audio path between channels there is a complete absence of crosstalk.
Frequency-response channel matching is superb. The musical picture is seamless and exquisitely detailed with a multichannel soundstage that is astonishingly transparent, cohesive and three dimensional.